What Is Backlight Bleeding And How To Get Rid Of It Permanently !–

Something that users who have monitors created utilize active backlight display. Is the common problem of backlight bleeding, also known as “flashlight bleeding.” This occurs when the backlight appears within the corner of the screens seeming to appear cloudy or having irregular patches of light when in actuality, the screen is meant to be black.

We also have experience within known phenomenon and understand how irritating it can be, rendering your display to appear very unpleasant. However, we have found a four steps solution that can help rid this issue permanently. Thus stick around to find out this exact process! 

What Is Backlight Bleeding –

Before fixing this issue, we must first understand What Is Backlight Bleeding: Blacklight Bleeding is caused by the alignment of the liquid crystal within IPS panels, using a number of layers precisely stacked against each other and over an extended period this pressure causes some of the blacklight to bleed into the display appearing darker within some areas most noticeable within the corners. 

Steps To Rid Backlight Bleeding Permentanly –

As previously stated, backlight bleeds often occur within the corner of the screens; this is known as “Flashlight Bleeding” or either “Clouding” which are irregular patches of light that are visible when the screen is supposed to be black. It is to be noted that flash lighting bleeding is prevalent within both larger and smaller displays. However, clouding backlight bleeding is more prevalent within larger screens.

Fortunately, there is an easy fix to this problem without having to fear to damage your hardware or warranty, and all you will need to perform this is a microfiber cloth and a screwdriver.

1. Make sure your TV or monitor is turned off and allow for appropriate cooling time.

2. Carefully turn each screw halfway counter-clockwise. As this should ease pressure buildup, as the majority of time panel warping occurs, from the panel layer being pressed against each other most notable within the corners loosening the screws should alleviate some of this pressure.

3. Turn on your TV or monitor to check if some of the backlight bleeding is still prevalent.

4. Gently rub around the areas where you suspect the bleeding occurred, rub in a circular motion careful not to apply too much pressure. However, enough till you can see the reflectors in the screen panel warp slightly.

If completed, all those steps and the backlight bleeding still prevalent wait a day or two to let the display settle in. And repeat the steps until the backlight bleeding has disappeared. If you’ve done all those steps numerous times and the backlight bleeding remains, then all you can now do is try to manage it.

• Adjust the brightness of your display.
• Increase the light level in the room you are using the display in.
• Use light-colored backgrounds and application themes.

You also can check if the seller can change the display or give you a new monitor; some warranties allow you to replaced or return it. However, If you would instead purchase a new monitor then read our post where we explain the (Best Monitors Of 2021 For Our Top Picks)

Ways To Avoiding Monitor Bleeding –

Unfortunately, there is no way to avoid backlight bleeding if a display uses an active backlight display; the only way to altogether prevent this issue is to choose an OLED display. They will not have any backlight bleeding due to being created from an organic light-emitting diode. They do tend to be more expensive but also make for great monitors, both visually and performance-wise. (Click Here For The Best OLED Monitors On Amazon)

IPS Glow VS Backlight Bleed –

The difference between IPS glow VS Backlight Bleeding: IPS Glow is heavily dependent on viewing angle, distance, as well as your environment, as the less light an environment has, the less visible IPS glow is.

Additionally, IPS  admit different colors within various systems high refresh rate gaming monitors tend to have a brownish or bluish glow, ultrawide have more of a yellowish, and monitors with 60 hertz appear a whiteish grey color. And these various hues are only visible within the corners and edges of the screen on bright images

With backlight bleeding, the LED backlight behind the display panel, it’s applying too much pressure on the display, and unlike IPS is not depended on the distance, viewing angle, or environment. And as stated, before it is possible to loosen the panel to help decrease the amount of backlight bleeding. Backlight bleeding tends to be visible near the edge middle or bottom of the display as these areas tend to be stiffer and the most tightly secured.

Conclusion –

We hope these methods listed above help eliminate, although not guaranteed, they should help make your backlight bleeding at least manageable.